26.5 cm head · Corner-grip wipes · 75 or 110 cm iron pole
Press a dry or wet wipe into the four corner grips, mop, then peel it off and bin it: a low-cost, no-wash flat mop that sells on the repeat order for wipes.
| Product name | Swivel flat mop for disposable wipes |
|---|---|
| Head | PP flat plate, 26.5 cm (10.43 in) long |
| Wipe fixing | Four corner slots with soft sawtooth rubber grips |
| Wipes | Disposable non-woven, dry or wet |
| Joint | Swivel, 180° front to back and side to side |
| Body material | PP, iron and microfiber |
| Pole | Iron, three push-fit sections: 75 cm with two, 110 cm with three |
| Pole top | Hanging ring |
| Colour | Mint and white as photographed |
| Pack contents | 1 mop |
| MOQ | 2,000 sets per specification |
| Lead time | 35 days |
| Sample | 5–7 days |
| Reference | MOP-FL-026 |
| Head | Flat rectangular, X-shaped, four-point star, triangle, round, heart-shaped or split U-shaped, by model; 15–90 cm long across the range |
|---|---|
| Cleaning surface | Microfiber or chenille pads and cloths, cotton yarn pad, or disposable wipes, sheets and towels, by model |
| Pad fixing | Clamp or press-in grips, hook-and-loop, end pockets, elastic slip-on cover, or pad hooked over the frame ends, by model |
| Wringing | None, fold-and-twist, squeeze on the pole (sliding sleeve, frame or scraper, or spring-folding head), bucket squeeze slot or spin bucket, by model |
| Pole | Iron, steel, stainless steel or aluminium by model, up to 153 cm overall; the handheld wiper has no pole |
| Bucket | Collapsible, squeeze-slot, spin or clean/dirty-water separation bucket on bucket sets; mop only on the other models |
NoteReference codes are ours, for quoting against this website. They are not factory part numbers; your own article number goes on the carton.
| Quantity | Unit price | Saving | Request a quote |
|---|---|---|---|
| 2,000–4,999 sets | US$ 2.44 | — | |
| 5,000–9,999 sets | US$ 2.10 | 14% off | |
| 10,000+ sets | US$ 1.80 | 26% off |
Reference onlyIndicative FOB Shanghai on stock materials and plain packaging. The number that binds is the one on your quotation, which moves with material, colour count, printing, pack format and trade term.
A light flat mop made for disposable wipes. A dry or wet non-woven wipe is laid under the 26.5 cm head and its edges pressed into four corner grips; after cleaning it is peeled off and thrown away.
The head sits on a swivel joint, the iron pole goes together in three push-fit sections for 75 or 110 cm, and a ring at the top hangs it on a hook.
Lay a wipe under the head, fold the edges over the top and push them into the four corner slots. Sawtooth rubber in each slot grips the wipe; to change it, pull the corners free and drop the used wipe in the bin.
The pole sections push together, the head locks onto the pole with a button so it does not drop off mid-clean, and a ring at the top of the grip hangs the mop on a wall hook.
The joint above the head turns 180° front to back and 180° side to side, so the head stays flat on the floor while the pole is angled round furniture and into corners.
The factory describes the dry wipes as electrostatic, holding dust and hair on the fibres. With a wet wipe the same mop is used on hard floors, glass and outdoor tiles.
The head is 26.5 cm (10.43 in) long. With two pole sections the mop stands 75 cm (29.52 in); with all three, 110 cm (43.30 in).
| Head | 26.5 cm long |
|---|---|
| Height | 75 or 110 cm |
| Pole | Iron, 3 sections |
| Wipes | Dry or wet, disposable |
| Head body | PP |
| MOQ | 2,000 sets |
| Your logo | On the head or pole grip — quoted on request |
|---|---|
| Packaging | Your printed box, sleeve or header card — quoted on request |
| Graphics | Printed graphics to your artwork — quoted on request |
| Colours | Head and grip colours to your brief — quoted per colourway |
| Wipes | Dry or wet wipe packs, including printed patterns, to your spec — quoted on request |
The factory lists colour as customisable and shows wipes printed with patterns, so a branded mop with matching wipe packs is a realistic programme. Minimums are quoted against your order size.
The wipes, not the mop, are the repeat order. Plan the refill pack size and count alongside the mop from the first order.
Tooling costs, timelines and what stays on your account are the same across every product and are set out once on OEM and private label.
| Pack contents | 1 mop (head and three pole sections); wipes quoted separately |
|---|---|
| Carton type | Export corrugated, marked to your scheme |
| Loading port | Shanghai; Ningbo on request |
| Payment | 30% T/T deposit, balance against copy B/L |
The pole comes apart into three short sections and the head is flat, so the set packs into a small carton. At this price freight per unit can be close to the factory cost, so ask for the carton size with your quote.
Sea freight is the normal route for a full order; air freight only makes sense for samples.
Trade terms, freight options and document sets are the same for every order and are set out once on ordering terms.
24-inch aluminium plate · Microfiber pad · 360° swivel joint
34 × 10.5 cm plate · Press-to-clamp cloth · 128 cm iron pole
25 × 9.5 cm head · 127 cm 3-section pole · 10 dry + 10 wet cloths
25 cm clamp head · 10 dry refills + 2 cloths · Wall holder
25 cm clamp head · 20 dry sheets + 1 microfiber cloth · 128 cm pole
14 × 37 cm X-shaped head · Fold-and-twist wring · 140 cm
Pick your options, hit request a quote, and the form arrives with the version and the configuration already filled in.
Swivel Flat Mop for Disposable Wipes
MOP-FL-026 · Flat mops
One person reads every enquiry. Or write to leo.ma@szkare.com.