Folding PVA sponge head · 360° swivel · 124 cm in use
Fold the head and push down, and the sleeve closes over the sponge to squeeze it without a hand touching it; the swivel joint lets the flat head turn under furniture and along walls.
Size chart of the fold-and-squeeze PVA sponge mop: 124 cm in use, 137 cm folded, pole sections
Reference
MOP-SO-008
MOQ
2,000 sets
Lead time
35 days
Sample
5–7 days
Specification
This version · MOP-SO-008
What makes this version different
Product name
Fold-and-squeeze PVA sponge mop
Head
PVA sponge on a PP and ABS frame, folds in half
Wringing
Fold the head and push down; the sleeve squeezes the sponge, a knob tightens it
Water removal
80–90% (factory rating)
Joint
360° swivel
Pole
Iron, 3 sections (39.5 cm top section; 65.5 cm lower section with sleeve)
Height
124 cm in use; 137 cm with the head folded
Colour
Lilac frame and pole, yellow sponge
Use
Wet and dry mopping, under furniture, glass and wall tiles
Pack contents
1 mop with 1 sponge head
MOQ
2,000 sets per specification
Lead time
35 days
Sample
5–7 days
Reference
MOP-SO-008
Shared across Sponge mops
Sponge
PVA or wood-pulp cellulose; some heads listed only as sponge, by model
Wringing
Rollers, folding head, sliding sleeve or bucket slot, by model
Water removal
80–100% (factory ratings), by model
Handle
Iron, steel or stainless steel pole; short plastic handle on handheld models, by model
Sponge heads per set
1–6, by model; bucket included on bucket sets
NoteReference codes are ours, for quoting against this website. They are not factory part numbers; your own article number goes on the carton.
Wholesale tiers
Reference FOB Shanghai
MOP-SO-008 · Fold-and-Squeeze PVA Sponge Mop, Swivel Head
Quantity
Unit price
Saving
Request a quote
2,000–4,999 sets
US$ 4.87
—
5,000–9,999 sets
US$ 4.20
14% off
10,000+ sets
US$ 3.59
26% off
Reference onlyIndicative FOB Shanghai on stock materials and plain packaging. The number that binds is the one on your quotation, which moves with material, colour count, printing, pack format and trade term.
What this version is
A flat PVA sponge mop whose head folds in half to be wrung. With the head folded, the pole is pushed down so the sleeve at its foot closes over the sponge and squeezes it; a knob on the sleeve tightens the hold.
Opened out, the head sits on a 360° swivel joint, so the flat sponge turns under sofas and cabinets, along skirting and up onto glass. The mop stands 124 cm in use.
01
Fold, push down, squeeze
The sponge head hinges along its length. Fold it, push the pole down, and the sleeve wraps the folded sponge and presses the water out into the bucket or drain, so hands stay off the wet sponge.
Hands stay dry — the sleeve squeezes the sponge, not the hand.
80–90% water removal — as rated by the factory for this head.
02
360° swivel head
The joint above the head turns through a full circle, so the sponge can be steered round table legs and into the angle between furniture and the floor without lifting the mop.
Round legs — the head turns while the pole stays put.
03
Low enough for under furniture
Laid flat, the head and sleeve slide under cabinet bases, sofas and TV units, and the same head is used upright on shower glass and wall tiles. It works wet, or dry for dust.
Floors and glass — one head for both.
Wet or dry — damp for mopping, dry for dust.
04
Size and packing
Assembled, the mop is 124 cm tall with the head open and 137 cm with the head folded down for hanging. The pole comes apart into three sections for a short carton.
The pole ships in three sections, the longest 65.5 cm with the sleeve, so the carton is far shorter than the assembled mop. That is what keeps freight per unit down on a mop this light.
Sea freight is the sensible route for a full order; air freight on a boxed mop rarely makes commercial sense.
Trade terms, freight options and document sets are the same for every order and are set out once on ordering terms.
