Split U-shaped head · Grey and orange faces · 3-section steel pole
The split head folds up around the frame's centre spine and is squeezed inside it, so the pad is wrung without a bucket wringer or a hand on the cloth, and either face can be used.
A squeeze mop with a split, U-shaped head. To wring it, the head folds up into the teal frame on the pole, with the two halves of the pad either side of the frame's centre spine, and is squeezed inside the frame.
The pad has two faces, grey and orange, so the mop can be flipped to a fresh side. The steel pole comes in three sections and ends in a hanging hook.
01
Folds up to wring
The head swings up into the teal frame on the lower pole. The slot down the middle of the head lets it close around the frame's centre spine, and the frame squeezes both halves of the pad at once.
No bucket wringer — the frame on the pole does the squeezing.
02
Two faces on one pad
One face of the pad is grey microfiber and the other is orange. Flip the head over to carry on with the second face, and a dark strip runs along one long edge of the head.
Grey face — microfiber pile.
Orange face — the second side of the same pad.
03
Split U-shaped head
The head is cut into two arms joined at one end, giving it a U shape. Flat on the floor it mops like a standard flat head, and the gap between the arms is what lets it fold around the frame.
04
Pole and packing
The steel pole comes in three screw-together sections with a grey grip and a teal hook at the top for hanging. Each set ships with one double-sided pad.
Your printed box, sleeve or header card — from 2,000 sets
Graphics
Printed graphics to your artwork — from 2,000 sets
Colours
Frame, pole and pad colours to your brief — quoted per colourway
Pack contents
Extra pads per set, or pads sold as refills — quoted on request
Logo, printed packaging and graphics each start at 2,000 sets on this model. The factory lists colour as made to order, so the teal frame can be changed.
The split pad only fits this head, which makes refills a natural repeat order: decide early whether to sell spare pads alongside the mop.
Tooling costs, timelines and what stays on your account are the same across every product and are set out once on OEM and private label.
1 mop head and frame, 2 pole sections and 1 double-sided pad
Carton type
Export corrugated, marked to your scheme
Loading port
Shanghai; Ningbo on request
Payment
30% T/T deposit, balance against copy B/L
With the pole in sections and no bucket in the set, this mop packs into a long, slim carton, so many more sets fit in a container than with a mop-and-bucket kit. Ask for the carton size before comparing freight per unit.
Sea freight suits a full order; a small trial lot can go by air if the timing matters.
Trade terms, freight options and document sets are the same for every order and are set out once on ordering terms.
