品番 · MOP-SO-011 モップシステム · スポンジモップ

Double-Roller PVA Sponge Mop, White or Teal

PVA sponge head · Double-roller squeeze · 2 heads per set

A lever on the handle sleeve draws the sponge between two rollers, so it is wrung out standing up and without wet hands; the head turns 90° to slide under a toilet or along a curtain line.

Wringing
Lever-drawn double roller
Colour
White, or teal sleeve with grey rollers
Pack
1 mop with 2 sponge heads
MOQ
2,000 sets
Colour
本バージョンで固定済み Lever-drawn double rollerWhite, or teal sleeve with grey rollers1 mop with 2 sponge heads
メールする
参照
MOP-SO-011
最小発注数量
2,000 sets
リードタイム
35 days
サンプル
5–7 days

仕様

本バージョン · MOP-SO-011
このバージョンの違い
Product name Double-roller PVA sponge mop
Head Ribbed PVA sponge on a roller frame
Wringing Pull the lever on the handle sleeve; two rollers squeeze the sponge
Water removal 90–100% (factory rating)
Head joint Turns 90° to the pole
Colour White frame and rollers, or teal sleeve with grey rollers; grey sponge
Use Wet mopping and spill pick-up on hard floors
Pack contents 1 mop with 2 sponge heads
Price basis Prices shown are for the white mop; the factory lists the same price tiers for the teal version
MOQ 2,000 sets per specification
Lead time 35 days
Sample 5–7 days
Reference MOP-SO-011
スポンジモップ 共通仕様
SpongePVA or wood-pulp cellulose; some heads listed only as sponge, by model
脱水Rollers, folding head, sliding sleeve or bucket slot, by model
Water removal80–100% (factory ratings), by model
HandleIron, steel or stainless steel pole; short plastic handle on handheld models, by model
Sponge heads per set1–6, by model; bucket included on bucket sets

注記参考コードは、当サイトでの見積もり参照用に当社が設定したものです。工場の部品番号ではありません。カートンにはお客様ご自身の品番をご記載ください。

卸売価格帯

上海FOB参考
MOP-SO-011 · Double-Roller PVA Sponge Mop, White or Teal
数量 単価 割引額 お見積もりを依頼する
2,000–4,999 sets US$ 4.00 —
5,000–9,999 sets US$ 3.45 14% off
10,000+ sets US$ 2.95 26% off

参考用上海FOBの参考価格であり、在庫材料・無地包装に基づきます。確定する価格はお見積書に記載の金額で、材料、色数、印刷、包装形態、取引条件によって変動します。

What this version is

A PVA sponge mop with the wringer built into the head as a pair of rollers. Pulling the lever on the white handle sleeve draws the ribbed sponge up between the rollers, which squeeze it out over the bucket or drain.

The head turns 90° on its joint, so it can be pushed edge-first under a toilet bowl or along a narrow strip of floor. Each set ships with two sponge heads, in white or in teal with grey rollers.

Hands lifting the lever so the double rollers squeeze water out of the PVA sponge

01 · Pull the lever, the rollers wring it

The lever sits on the sleeve at the lower end of the handle. Lift it and the sponge is pressed between the two rollers above it, so the water runs out without the sponge being touched.

  • Hands stay dry — the rollers do the squeezing.
  • 90–100% water removal — as rated by the factory; treat it as a best case.
White double-roller sponge mop picking up grit and a liquid spill on a hard floor

02 · Spills and grit on hard floors

The ribbed PVA sponge soaks up standing liquid and gathers loose grit, which suits kitchens, entrances and tiled floors where spills are the daily job.

  • Spill pick-up — the sponge draws up standing liquid.
Sponge mop head turned 90° under a toilet bowl and run edge-on along a curtain

03 · Turns 90° for tight spots

Turned on its joint, the head goes in edge-first under the curve of a toilet bowl, behind a pedestal or along a curtain line, and the slim handle follows it in.

At a glance
Head Ribbed PVA sponge
Wringing Lever and double roller
Joint Turns 90°
Colour White, or teal and grey
Pack 1 mop, 2 heads
MOQ 2,000 sets

See the sponge mops range

MOP-SO-011 — what you can change
Your logo On the handle sleeve or roller frame — quoted on request
Packaging Your printed box, sleeve or label — quoted on request
Graphics Printed graphics to your artwork — quoted on request
Colours Frame, sleeve and sponge colours to your brief — quoted per colourway
Pack contents Number of sponge heads per set, or heads sold as refills — quoted on request

The long sleeve, white or teal, gives a clean panel for a logo. Logo, packaging and colour work are each quoted against your order quantity.

The set already carries a spare head, and replacement sponges are the repeat order: decide early whether heads are also packed on their own.

Tooling costs, timelines and what stays on your account are the same across every product and are set out once on OEM and private label.

Full programme terms

MOP-SO-011 — packing and loading
Pack contents 1 mop with 2 PVA sponge heads
Carton type Export corrugated, marked to your scheme
Loading port Shanghai; Ningbo on request
Payment 30% T/T deposit, balance against copy B/L

Roller mops are cube, not weight: carton size decides freight per unit more than the factory price does. Ask for the carton dimensions with the quote before comparing landed costs.

Sea freight is the sensible route for a full order; air freight on a boxed mop rarely makes commercial sense.

Trade terms, freight options and document sets are the same for every order and are set out once on ordering terms.

スポンジモップ のその他のバージョン

他 15 件
ここから始める

上記のすべてを1通のメールで。

オプションを選択して「見積もりをリクエスト」をクリックすると、バージョンと構成があらかじめ入力された状態でフォームが表示されます。

leo.ma@szkare.com
メール 通話 見積もりを取得