Name: Printed Flat Mop for Disposable Wipes
Brand: KARE MOP
SKU: MOP-FL-039
Availability: InStock

仕様

本バージョン · MOP-FL-039

このバージョンの違い
Product name	Printed flat mop for disposable wipes
Baseplate	PP, 25 × 10 cm, printed top, textured underside
Wipe fixing	Wipe edges pushed into 4 slit grippers at the corners
Wipes	Dry or wet disposable wipes, not stated as included
Handle	PP with hanging loop
Pole	Iron, 3 push-fit sections of about 35–37 cm
Height	About 108 cm assembled
Net weight	0.4 kg
Pack contents	1 mop
MOQ	2,000 sets per specification
Lead time	35 days
Sample	5–7 days
Reference	MOP-FL-039

フラットモップ共通仕様
ヘッド	Flat rectangular, X-shaped, four-point star, triangle, round, heart-shaped or split U-shaped, by model; 15–90 cm long across the range
Cleaning surface	Microfiber or chenille pads and cloths, cotton yarn pad, or disposable wipes, sheets and towels, by model
パッド固定	Clamp or press-in grips, hook-and-loop, end pockets, elastic slip-on cover, or pad hooked over the frame ends, by model
脱水	None, fold-and-twist, squeeze on the pole (sliding sleeve, frame or scraper, or spring-folding head), bucket squeeze slot or spin bucket, by model
ポール	Iron, steel, stainless steel or aluminium by model, up to 153 cm overall; the handheld wiper has no pole
バケツ	Collapsible, squeeze-slot, spin or clean/dirty-water separation bucket on bucket sets; mop only on the other models

注記参考コードは、当サイトでの見積もり参照用に当社が設定したものです。工場の部品番号ではありません。カートンにはお客様ご自身の品番をご記載ください。

卸売価格帯

上海FOB参考

MOP-FL-039 · Printed Flat Mop for Disposable Wipes
数量	単価	割引額
2,000–4,999 sets	US$ 2.26	—
5,000–9,999 sets	US$ 1.95	14% off
10,000+ sets	US$ 1.67	26% off

参考用上海FOBの参考価格であり、在庫材料・無地包装に基づきます。確定する価格はお見積書に記載の金額で、材料、色数、印刷、包装形態、取引条件によって変動します。

What this version is

A light dusting mop built around disposable wipes. The 25 × 10 cm PP baseplate has a printed top and four slit grippers at the corners; the edges of a dry or wet wipe are pushed into them, and the used wipe is pulled off and thrown away.

The pole is iron in three push-fit sections with a PP handle and hanging loop, and the whole mop weighs 0.4 kg. The top print can be made to your own artwork.

Disposable wipe being pressed into the corner gripper of the printed flat mop baseplate

01 · Press the wipe into the grippers

Lay the base on a wipe, fold the wipe up over the long edges and push it into the slit grippers at each corner. The grippers hold dry dusting wipes and thin wet wipes alike.

Four grippers — one at each corner of the base.
No hook-and-loop — the wipe is held by the slits alone.

Two hands wrapping a fresh white wipe round the printed flat mop baseplate

02 · Swap the wipe in seconds

Changing wipes is a two-hand job at the table or on the floor: pull the old one out of the grippers, wrap a fresh one round the base and press its edges in.

Used wipe on the printed flat mop showing dust picked up from a wooden floor

03 · Dry dusting on hard floors

With a dry wipe fitted the mop picks up dust, hair and fluff from wood, laminate and tile, and the dirty wipe goes straight in the bin, so there is no pad to wash.

Hands-off — used wipes go straight in the bin.

Textured underside of the flat mop base and a wipe held under the printed top

04 · Textured base under the print

The underside of the base has a raised wave pattern that presses the wipe against the floor, while the printed top carries the design and the grippers sit flush at the corners.

Structure of the printed flat mop: PP handle, iron rod and PP baseplate

05 · Structure and size

PP handle, iron pole and PP baseplate. The pole comes in three sections of roughly 35 to 37 cm, giving about 108 cm overall on a 25 × 10 cm base.

At a glance
Baseplate	25 × 10 cm
Height	About 108 cm
Pole	Iron, 3 sections
Handle and base	PP
Net weight	0.4 kg
Pack	1 mop
MOQ	2,000 sets

See the flat mops range

MOP-FL-039 — what you can change
Top print	Baseplate print to your artwork — quoted on request
Your logo	On the baseplate print or handle — quoted on request
Packaging	Your printed box — quoted on request
Pack contents	Dry or wet wipes packed with the mop — quoted on request
Colours	Handle, pole and gripper colours — quoted per colourway

The printed top is the selling point here: the factory already runs several flag and pattern designs and lists the mop as customised design, so your own artwork is the natural order.

The factory gives no fixed customisation MOQs for this item, so print, logo and packaging are quoted per order.

Tooling costs, timelines and what stays on your account are the same across every product and are set out once on OEM and private label.

Full programme terms

MOP-FL-039 — packing and loading
Pack contents	1 mop, pole in 3 sections
Retail box	11 × 5 × 38 cm
Export carton	48 × 44 × 42 cm, 0.088 m³, 24 sets
Carton type	Export corrugated, marked to your scheme
Loading port	Shanghai; Ningbo on request
Payment	30% T/T deposit, balance against copy B/L

The pole breaks down into three short sections, so each mop packs into an 11 × 5 × 38 cm box and 24 boxes fill a 0.088 m³ carton. That is a small, light pack for a full-height mop.

Sea freight is the sensible route for a full order. Wipes, if you add them to the set, change the carton count, so tell us early.

Trade terms, freight options and document sets are the same for every order and are set out once on ordering terms.