Stainless steel pole · Cloth-clamp plate · 360° swivel head
Clamps on the plate hold the microfiber pad, or an ordinary floor cloth, flat against the head, and the 360° swivel joint turns it into corners on a stainless steel pole.
A flat mop on a two-section stainless steel pole, with grip sleeves and a hanging loop. The head is a flat plate with cloth clamps, so the pad is held flat against it rather than stuck on.
It ships with one microfiber pad, and the same clamps hold a plain floor cloth. The plastic parts can be moulded in your colour.
01
Stainless steel pole
The pole is stainless steel in two sections, with plastic grip sleeves at the top and at the joint. A loop on the end lets the mop hang up to dry after use, off the floor of the store cupboard.
02
Cloth-clamp head
Clamps along the plate grip the edge of the cloth and hold it flat. The set comes with a microfiber pad, and the same clamps take an ordinary floor cloth when the pad is in the wash.
Microfiber pad — supplied with the mop.
Plain cloths — held by the same clamps.
03
Microfiber pad
The pad is microfiber with a looped pile in the centre and a flat border. The pile traps fine dust on dry floors and takes up water for damp mopping.
04
360° swivel joint
The joint between pole and head swivels through 360°, so the head stays flat while the pole turns, and the mop follows skirting and gets into corners.
Printed graphics to your artwork — from 2,000 sets
Colours
Head and grip colours to your brief — quoted per colourway
Pack contents
Extra pads per set, or pads sold as refills — quoted on request
Logo, printed packaging and graphics each start at 2,000 sets. The plastic parts are moulded in the colour you choose.
Because the clamps also take ordinary cloths, decide early whether to sell spare microfiber pads alongside the mop or leave the user to fit their own cloth.
Tooling costs, timelines and what stays on your account are the same across every product and are set out once on OEM and private label.
