Réf. · MOP-FL-017 Systèmes de serpillière · Serpillières plates

Squeeze Spray Flat Mop with Stainless Pole

Trigger spray · Squeeze frame · 4 microfiber pads

Pull the trigger to mist the floor in front of the head, then run the pad through the sliding frame to squeeze it, so nobody has to handle a wet cloth.

Spray
Trigger, reservoir in the handle
Wringing
Sliding squeeze frame, 80–90% water removal
Pads
4 microfiber pads per set
MOQ
2,000 sets
Envoyez-nous un e-mail
Référence
MOP-FL-017
MOQ
2,000 sets
Délai de livraison
35 days
Échantillon
5–7 days

Spécification

Cette version · MOP-FL-017
Qu'est-ce qui rend cette version différente ?
Product name Squeeze spray flat mop with stainless pole
Pole Stainless steel with white plastic grips
Spray Trigger under the handgrip; refillable reservoir in the handle
Wringing Sliding frame squeezes the pad; factory-rated 80–90% water removal
Head Flat rectangular plate on a swivel joint
Pad Microfiber
Use Damp mopping on hard floors, including wood
Pack contents 1 mop with 4 microfiber pads
MOQ 2,000 sets per specification
Lead time 35 days
Sample 5–7 days
Reference MOP-FL-017
Partagé à travers Serpillières plates
TêteFlat rectangular, X-shaped, four-point star, triangle, round, heart-shaped or split U-shaped, by model; 15–90 cm long across the range
Cleaning surfaceMicrofiber or chenille pads and cloths, cotton yarn pad, or disposable wipes, sheets and towels, by model
Fixation du padClamp or press-in grips, hook-and-loop, end pockets, elastic slip-on cover, or pad hooked over the frame ends, by model
EssorageNone, fold-and-twist, squeeze on the pole (sliding sleeve, frame or scraper, or spring-folding head), bucket squeeze slot or spin bucket, by model
MancheIron, steel, stainless steel or aluminium by model, up to 153 cm overall; the handheld wiper has no pole
SeauCollapsible, squeeze-slot, spin or clean/dirty-water separation bucket on bucket sets; mop only on the other models

RemarqueLes codes de référence sont les nôtres, pour les devis sur ce site. Ce ne sont pas des numéros de pièces d'usine ; votre propre référence article doit figurer sur le carton.

Tranches de gros

Référence FOB Shanghai
MOP-FL-017 · Squeeze Spray Flat Mop with Stainless Pole
Quantité Prix unitaire Économie Demander un devis
2,000–4,999 sets US$ 6.09 —
5,000–9,999 sets US$ 5.25 14% off
10,000+ sets US$ 4.49 26% off

Référence seulementIndicatif FOB Shanghai sur matériaux en stock et emballage standard. Le chiffre qui fait foi est celui de votre devis, qui varie selon le matériau, le nombre de couleurs, l'impression, le format d'emballage et les conditions commerciales.

What this version is

A flat spray mop with the water carried in the handle. A trigger under the handgrip sprays a fine mist ahead of the head, so there is no bucket to fill for everyday damp mopping.

A white frame on the head slides along the pad and squeezes it, keeping hands off the wet cloth. The pole is stainless steel and each set ships with four microfiber pads.

01

Spray from the handle

Pull the trigger and a fine mist comes out just above the head, wetting the floor in front of the pad. Use as much or as little water as the floor needs.

  • No bucket — for everyday damp mopping.
  • Mist spray — wets the floor ahead of the head.
02

Reservoir in the handle

The reservoir sits in the top of the handle with a filler cap, and the trigger below the grip. Fill it with water or diluted floor cleaner.

03

Squeeze without touching

The white frame on the head slides along the pad and squeezes the water out of it. The factory rates the squeeze at 80–90% water removal, so the pad goes back on the floor damp rather than wet.

  • Hands stay dry — the frame squeezes the pad, not the user.
  • 80–90% — water removal, as rated by the factory.
04

Four pads per set

Every set ships with four microfiber pads, so one can be on the mop while the others are in the wash. The flat head and swivel joint suit tiles, laminate and wooden floors.

Squeeze spray flat mop spraying a fine mist across a floor
Close-up of the refillable reservoir and trigger in the spray mop handle
Microfiber pad of the squeeze spray flat mop held in its white sliding frame
At a glance
Pole Stainless steel
Spray Trigger, reservoir in handle
Wringing Sliding squeeze frame
Pad Microfiber
Pads per set 4
MOQ 2,000 sets

See the flat mops range

MOP-FL-017 — what you can change
Your logo On the handle or head — quoted on request
Packaging Your printed box — quoted on request
Graphics Printed graphics to your artwork — quoted on request
Colours Handle, head and reservoir colours to your brief — quoted per colourway
Pack contents More or fewer pads per set, or pads sold as refills — quoted on request

Logo, packaging and graphics minimums are quoted on request for this mop. The set already carries four pads, which gives room to trim the count for a lower price point.

Pads are the repeat order behind a spray mop: decide early whether spares go in the box or sell separately as refill packs.

Tooling costs, timelines and what stays on your account are the same across every product and are set out once on OEM and private label.

Full programme terms

MOP-FL-017 — packing and loading
Pack contents 1 mop with 4 microfiber pads
Carton type Export corrugated, marked to your scheme
Loading port Shanghai; Ningbo on request
Payment 30% T/T deposit, balance against copy B/L

A spray mop is cube, not weight: ask for the carton size and sets per carton before comparing freight per unit with a plain flat mop.

Sea freight is the sensible route for a full order. Reservoirs ship empty, so there is no liquid to declare.

Trade terms, freight options and document sets are the same for every order and are set out once on ordering terms.

Autres versions de Serpillières plates

24 de plus
Commencez ici

Tout ce qui précède en un seul e-mail.

Choisissez vos options, cliquez sur « Demander un devis », et le formulaire s'affiche avec la version et la configuration déjà remplies.

leo.ma@szkare.com
E-mail Appeler Obtenir un devis