Stainless steel pole · Cloth-clamp plate · 360° swivel head
Clamps on the plate hold the microfiber pad, or an ordinary floor cloth, flat against the head, and the 360° swivel joint turns it into corners on a stainless steel pole.
Two stainless steel pole clamp flat mops in purple, with their retail box between them
Référence
MOP-FL-016
MOQ
2,000 sets
Délai de livraison
35 days
Échantillon
5–7 days
Spécification
Cette version · MOP-FL-016
Qu'est-ce qui rend cette version différente ?
Product name
Stainless steel pole clamp flat mop
Pole
Stainless steel, two sections with grip sleeves and a hanging loop
Head
Flat plate with cloth clamps
Joint
360° swivel
Pad
Microfiber
Also takes
Plain floor cloths held by the clamps
Colour
Plastic parts in your colour
Pack contents
1 mop with 1 microfiber pad
MOQ
2,000 sets per specification
Lead time
35 days
Sample
5–7 days
Reference
MOP-FL-016
Partagé à travers Serpillières plates
Tête
Flat rectangular, X-shaped, four-point star, triangle, round, heart-shaped or split U-shaped, by model; 15–90 cm long across the range
Cleaning surface
Microfiber or chenille pads and cloths, cotton yarn pad, or disposable wipes, sheets and towels, by model
Fixation du pad
Clamp or press-in grips, hook-and-loop, end pockets, elastic slip-on cover, or pad hooked over the frame ends, by model
Essorage
None, fold-and-twist, squeeze on the pole (sliding sleeve, frame or scraper, or spring-folding head), bucket squeeze slot or spin bucket, by model
Manche
Iron, steel, stainless steel or aluminium by model, up to 153 cm overall; the handheld wiper has no pole
Seau
Collapsible, squeeze-slot, spin or clean/dirty-water separation bucket on bucket sets; mop only on the other models
RemarqueLes codes de référence sont les nôtres, pour les devis sur ce site. Ce ne sont pas des numéros de pièces d'usine ; votre propre référence article doit figurer sur le carton.
Tranches de gros
Référence FOB Shanghai
MOP-FL-016 · Stainless Steel Pole Clamp Flat Mop
Quantité
Prix unitaire
Économie
Demander un devis
2,000–4,999 sets
US$ 6.96
—
5,000–9,999 sets
US$ 6.00
14% off
10,000+ sets
US$ 5.13
26% off
Référence seulementIndicatif FOB Shanghai sur matériaux en stock et emballage standard. Le chiffre qui fait foi est celui de votre devis, qui varie selon le matériau, le nombre de couleurs, l'impression, le format d'emballage et les conditions commerciales.
What this version is
A flat mop on a two-section stainless steel pole, with grip sleeves and a hanging loop. The head is a flat plate with cloth clamps, so the pad is held flat against it rather than stuck on.
It ships with one microfiber pad, and the same clamps hold a plain floor cloth. The plastic parts can be moulded in your colour.
01
Stainless steel pole
The pole is stainless steel in two sections, with plastic grip sleeves at the top and at the joint. A loop on the end lets the mop hang up to dry after use, off the floor of the store cupboard.
02
Cloth-clamp head
Clamps along the plate grip the edge of the cloth and hold it flat. The set comes with a microfiber pad, and the same clamps take an ordinary floor cloth when the pad is in the wash.
Microfiber pad — supplied with the mop.
Plain cloths — held by the same clamps.
03
Microfiber pad
The pad is microfiber with a looped pile in the centre and a flat border. The pile traps fine dust on dry floors and takes up water for damp mopping.
04
360° swivel joint
The joint between pole and head swivels through 360°, so the head stays flat while the pole turns, and the mop follows skirting and gets into corners.
Printed graphics to your artwork — from 2,000 sets
Colours
Head and grip colours to your brief — quoted per colourway
Pack contents
Extra pads per set, or pads sold as refills — quoted on request
Logo, printed packaging and graphics each start at 2,000 sets. The plastic parts are moulded in the colour you choose.
Because the clamps also take ordinary cloths, decide early whether to sell spare microfiber pads alongside the mop or leave the user to fit their own cloth.
Tooling costs, timelines and what stays on your account are the same across every product and are set out once on OEM and private label.
