4-row roller wring · 360° swivel head · 1 spare head
Pulling the head back into the white sleeve folds the sponge and runs it between four rows of spring-loaded rollers, so it is wrung on all sides without a hand touching it, and the mop stands slim against a wall afterwards.
Four-roller sponge mop wringing water into a bucket, inset of the folding sponge head
المرجع
MOP-SO-016
الحد الأدنى لكمية الطلب
2,000 sets
المهلة الزمنية
35 days
عينة
5–7 days
المواصفات
هذا الإصدار · MOP-SO-016
ما الذي يميز هذه النسخة
Product name
Four-roller sleeve-wring sponge mop
Head
Grey ribbed sponge on a black clip-in backing plate
Head joint
360° swivel
Head fitting
Align the tabs with the slots on the frame and push forward
Wringing
Pull the head back into the sleeve; four rows of rollers squeeze the folded sponge; factory rating 80–90% water removal
Sleeve
White plastic, tapered, with a grey rim
Pole
Metal, screw-together sections with hanging loop
Use
Wet mopping on tiles, stone, vinyl and sealed wood
Pack contents
1 mop with fitted sponge head and 1 replacement head
MOQ
2,000 sets per specification
Lead time
35 days
Sample
5–7 days
Reference
MOP-SO-016
مشترك عبر مماسح إسفنجية
Sponge
PVA or wood-pulp cellulose; some heads listed only as sponge, by model
العصر
Rollers, folding head, sliding sleeve or bucket slot, by model
Water removal
80–100% (factory ratings), by model
Handle
Iron, steel or stainless steel pole; short plastic handle on handheld models, by model
Sponge heads per set
1–6, by model; bucket included on bucket sets
ملاحظةرموز المرجعية هي رموزنا الخاصة، وتُستخدم للاستفسار عن الأسعار عبر هذا الموقع. وهي ليست أرقام قطع المصنع؛ بل يُكتب رقم الصنف الخاص بكم على الكرتون.
شرائح أسعار الجملة
مرجع FOB شنغهاي
MOP-SO-016 · Four-Roller Sleeve-Wring Sponge Mop
الكمية
سعر الوحدة
التوفير
اطلب عرض سعر
2,000–4,999 sets
US$ 10.18
—
5,000–9,999 sets
US$ 8.78
14% off
10,000+ sets
US$ 7.50
26% off
مرجع فقطسعر FOB شنغهاي استرشادي على المواد المخزّنة والتغليف العادي. السعر المُلزِم هو الوارد في عرض السعر الخاص بكم، والذي يتغيّر وفقًا للمادة، وعدد الألوان، والطباعة، وشكل التغليف، والشروط التجارية.
What this version is
A sponge mop with the wringer built into a tapered white sleeve at the foot of the pole. Pull the head back and it folds up into the sleeve, where four rows of spring-loaded rollers squeeze the sponge from both sides.
The sponge clips onto the frame with tabs and slots, the head swivels through 360°, and each set includes a replacement head.
01 · Four rows of rollers
Inside the sleeve, two pairs of spring-loaded rollers sit either side of the folded head. As the sponge is drawn through them it is pressed on all four sides, and the water runs out of the open end into the bucket.
Hands stay dry — the sponge is wrung inside the sleeve.
80–90% water removal — as rated by the factory for this head.
02 · Pull back to wring, push out to mop
Hold the pole, pull the head back into the sleeve and the sponge folds and is squeezed. Push it out again and the two halves open flat, ready for the floor.
Two movements — pull back, push out.
No pedal or wringer bucket — any bucket or sink will do.
03 · Sponge that stays soft
The factory states that this sponge does not harden when it dries, so it can be used straight away without soaking first, unlike a conventional sponge head that goes stiff between uses.
No pre-soaking — according to the factory.
Ribbed face — spreads water evenly over the floor.
04 · Clip-in head, screw-together pole
The pole sections screw together by hand. To fit a sponge, line up the tabs on its backing plate with the slots on the frame and push it forward until it locks.
Tool-free assembly — pole and head go on by hand.
Spare head included — 1 fitted and 1 replacement per set.
05 · Stands slim when stored
With the head pulled into the sleeve, the mop is no wider than its sleeve and leans against a wall or hangs from the loop on the pole.
1 mop with fitted sponge head and 1 replacement head
Carton type
Export corrugated, marked to your scheme
Loading port
Shanghai; Ningbo on request
Payment
30% T/T deposit, balance against copy B/L
The pole comes apart into screw-together sections, so the set packs into a short box rather than a full-length tube. Ask for the carton size before you work out freight per unit.
Sea freight is the sensible route for a full order of sets; spare heads ship well as a separate refill carton if you plan to sell them on their own.
Trade terms, freight options and document sets are the same for every order and are set out once on ordering terms.